Most trade training in New Hampshire happens at its seven community colleges, which all charge residents the same $238 a credit plus a $25 fee in 2026-27, about $7,900 for a full-time year of 30 credits. This page covers all seven, plus the New Hampshire School of Mechanical Trades for evening electrical, plumbing, HVAC and gas courses. Electricians, plumbers and gas fitters are licensed by the state after years of paid apprentice work, and the online section shows what you can study from home.
New Hampshire at a glance
- Schools on this page
- All 7 community colleges and the New Hampshire School of Mechanical Trades (3 sites)
- Lowest-cost routes
- Paid apprenticeships; community college at $263 a credit with fees; evening and online classes at the in-state rate for everyone
- Short courses
- LNA in 6 to 8 weeks ($2,500 at Manchester CC); phlebotomy in 5 to 6 weeks ($1,500); CDL-A ($9,150) or a one-semester CDL certificate
- Licensed trades
- The state licenses electricians, plumbers, gas fitters, nurses, LNAs, cosmetologists, barbers and massage therapists
- Statewide median pay
- Electricians $62,840; plumbers $66,810; HVAC mechanics $73,850; LPNs $77,110 (BLS 2025)
Facts checked October 2026 from each college’s published tuition and program pages.
New Hampshire Trade Schools by Region
Every region has a community college, but the programs differ: aviation maintenance is only in Nashua, diesel and pipe welding in Berlin, marine maintenance in Laconia, dental assisting in Concord and veterinary technology in Portsmouth. Pick the program first, then the campus.
Online options for New Hampshire students
New Hampshire’s community colleges teach some career programs online at the in-state rate for every student, and national online schools add more choices. Online study cannot replace the hands-on hours New Hampshire requires for licensed trades. Each card shows what you can study online, what still happens in person and where to look. The linked profiles have prices and full details for the national schools.
Medical billing, coding and health information
- Online
- NHTI’s medical coding certificate is fully online and qualifies for financial aid. National schools also teach billing and coding online, and Fremont University says it can enroll New Hampshire residents in its online program.
- In person
- Nothing required by New Hampshire, which has no license for this work. None of the national online programs we profile requires an externship.
- Before you enroll
- Employers look for a national credential such as the AAPC CPC or NHA CBCS. NHTI and Ultimate Medical Academy take federal aid; ask the other schools about payment plans.
Explore: NHTI medical coding · Penn Foster · U.S. Career Institute · Ultimate Medical Academy · Fremont University
Pharmacy technician
- Online
- The coursework, through national online schools.
- In person
- It depends on the program: some national schools require an externship at a pharmacy and one makes it optional. See the details below.
- Before you enroll
- Under RSA 318:15-a, you must be registered or certified by the state Office of Professional Licensure and Certification before you work as a pharmacy technician. Ask who arranges any externship.
Externship by program
- Penn Foster: required, at least 130 hours at a community pharmacy, placed by a coordinator
- Blackstone: required, 160 hours at a CVS or Walgreens near you, depending on availability
- WTI: its 2025-26 handbook lists a 200-hour externship at a site you arrange
- U.S. Career Institute: optional 80-hour Walgreens externship for eligible graduates
Explore: Penn Foster · Blackstone · U.S. Career Institute · WTI
Business, IT and associate degrees
- Online
- New England College, based in Henniker, teaches associate and bachelor’s degrees online in seven-week terms for $375 a credit, the same in every state. The community colleges list online courses too.
- In person
- Nothing required; IT labs are done online.
- Before you enroll
- No state license is needed for IT; employers look for certifications such as CompTIA. Ask whether a program prepares you for them.
Explore: New England College Online · NHTI networking and cybersecurity · Nashua CC cybersecurity
HVAC
- Online
- Theory and EPA 608 exam prep.
- In person
- Penn Foster and USCI have no hands-on training, so you learn on the job. Pinnacle ends with a required 10-day, 80-hour boot camp in Kansas City, Missouri. Manchester CC and the NH School of Mechanical Trades teach HVAC in person.
- Before you enroll
- Handling refrigerant needs federal EPA 608 certification. Working on gas equipment in New Hampshire needs a state gas license with 1,000 to 2,000 hours of field experience.
Explore: Pinnacle Career Institute · Penn Foster · U.S. Career Institute · Manchester CC · NH School of Mechanical Trades
Trades that need in-person training
- Electrician and plumber: a New Hampshire journeyman electrician license needs 8,000 hours as an apprentice plus 600 hours of school. Manchester CC, Lakes Region CC and the NH School of Mechanical Trades teach apprentice classes in person.
- Cosmetology, barbering and massage: state law requires 1,200 school hours for cosmetology, 800 for barbering, 600 for esthetics and 300 for manicuring. Massage therapists must pass a national exam such as the MBLEx.
- LNA and nursing: LNA courses mix online theory with in-person labs and clinical hours (150 hours in all at Manchester CC and Great Bay CC), and nursing programs include clinical placements.
- Shop trades: welding, diesel, automotive, marine, aviation and line work are learned in a shop at the community colleges.
- CDL: federal rules require behind-the-wheel training. Manchester CC and White Mountains CC teach it.
New Hampshire Schools by Region
Each card is a short overview that links to the school’s own site, except Franklin Pierce, which has a full profile here. College prices are tuition and the mandatory fee per credit for New Hampshire residents unless noted.
Manchester and Nashua
The two colleges split the trades: Manchester for electrical, HVAC, welding, line work and short health courses, Nashua for aviation, automotive, collision and machining. The NH School of Mechanical Trades teaches evening courses for electricians, plumbers and HVAC technicians in Manchester. See the Manchester page for more detail on the area.
Manchester Community College
Southern New Hampshire’s main trades college. Credit programs include electrical technology (day or evening, and it meets New Hampshire’s apprentice school hours), HVAC on a two- or three-year track, welding, ASE-accredited automotive and an electrical lineworker certificate run with Eversource and the IBEW. Its workforce center adds short courses: a 150-hour LNA, phlebotomy, a 480-hour medical assistant apprenticeship, CDL-A and a 12-week accelerated welding program.
- Length
- Short courses 5 to 12 weeks; certificates; 2-year AAS degrees (HVAC 2 or 3 years)
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27); LNA $2,500, phlebotomy $1,500, medical assistant $5,800, CDL-A $9,150
Visit the college’s site →Nashua Community College
Nashua runs northern New England’s only FAA-approved aviation maintenance program, which prepares students for the airframe and powerplant exams, plus air traffic control. It also teaches Honda, Mazda and general automotive degrees, collision repair, precision manufacturing and CNC machining, nursing and River Valley CC’s one-year LPN program on its campus.
- Length
- Certificates; 2-year associate degrees
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27)
Visit the college’s site →New Hampshire School of Mechanical Trades
Evening and day courses in electrical, plumbing, HVAC, oil heat and gas work. Beginners can take 15-week Electrical 101 or Plumbing 101 pre-apprentice courses; working apprentices take the yearly 152-hour classes New Hampshire requires toward a journeyman license. It also teaches the gas licensing courses (60 hours for gas piping installer) and EPA 608 and NORA exam prep.
- Length
- Pre-apprentice 15 weeks; apprentice years 152 hours (19 weeks of evenings); HVAC courses 120 hours
- Accredited
- Not stated
- Federal aid
- No; interest-free payment plans
Cost: Electrical or Plumbing 101 $2,200 tuition; apprentice years $1,500 each plus books; HVAC courses $2,640 to $2,800; gas piping installer $1,300 (2026)
Visit the school’s site →Concord and the Lakes Region
NHTI in Concord focuses on health and engineering technology. Lakes Region CC in Laconia teaches electrical, automotive, marine and fire programs, and the NH School of Mechanical Trades has a Lakes Region site in Moultonborough.
NHTI, Concord’s Community College
NHTI is the state’s main college for health and technical careers: it has New Hampshire’s only accredited dental assisting program, plus dental hygiene, paramedic, radiologic technology, sonography and nursing. Its medical coding certificate is taught fully online and qualifies for financial aid.
- Length
- Certificates; 2-year associate degrees
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27)
Visit the college’s site →Lakes Region Community College
Laconia’s college teaches electrical systems installation, where lab hours count toward New Hampshire apprentice experience, and electrical power and control. It runs GM and Toyota automotive programs, a seven-month marine maintenance certificate with more than 30 marina partners, fire science, paramedic, culinary arts, a hybrid LNA course and nursing.
- Length
- LNA weeks; marine maintenance 7 months; GM automotive 21-month co-op degree; 2-year associate degrees
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27)
Visit the college’s site →Seacoast
Great Bay CC teaches in Portsmouth and at its technology center in Rochester. The NH School of Mechanical Trades has a Seacoast site in Hampton.
Great Bay Community College
The Seacoast’s community college. Trades include welding, CNC machining, nondestructive testing, evening automotive classes at its Rochester technology center and motorcycle repair taught at Seacoast Harley-Davidson in North Hampton. Health and animal programs include massage therapy, AVMA-accredited veterinary technology, surgical technology, nursing and short LNA, phlebotomy and medical assistant courses.
- Length
- Short courses; certificates (automotive and massage 3 semesters); 2-year associate degrees
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27)
Visit the college’s site →West and Monadnock
River Valley CC serves the Connecticut River valley from Claremont, Keene and Lebanon, mostly in health care. Franklin Pierce University in Rindge is a four-year university, listed here because it has a full profile on this site.
River Valley Community College
Western New Hampshire’s college focuses on health care: respiratory therapy, radiologic technology, occupational and physical therapist assistant, medical lab technician, massage therapy, nursing and short medical assistant, phlebotomy and LNA courses. Its one-year LPN program is also taught in Keene, Lebanon, Littleton, Manchester and Nashua.
- Length
- Short courses (medical assistant 16 weeks); LPN 1 year; 2-year associate degrees
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27)
Visit the college’s site →Franklin Pierce University
A residential university rather than a trade school: Rindge teaches bachelor’s degrees such as accounting, management and criminal justice. Manchester teaches the Doctor of Physical Therapy and a master’s entry program in nursing, and Lebanon the physician assistant master’s.
- Length
- 4-year bachelor’s; graduate health programs
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $44,276 a year at Rindge (2026-27)
View school profile →North Country
White Mountains CC in Berlin is the North Country’s trades college, with an academic center in Littleton.
White Mountains Community College
The North Country’s college teaches diesel and heavy equipment technology (the only AED-accredited diesel program in New England), advanced welding and ASME pipe welding, automotive, an electric vehicle technician certificate and a one-semester CDL program. River Valley CC’s LPN program is also taught on its campus.
- Length
- CDL 1 semester; welding certificates; 2-year associate degrees
- Accredited
- NECHE
- Federal aid
- Yes
Cost: $238 a credit plus a $25 per-credit fee for New Hampshire residents (2026-27); diesel tools $1,500 to $2,500 extra
Visit the college’s site →New Hampshire also has private cosmetology, barber and career schools we have not yet reviewed. Before you enroll at one, check that the state licensing board for your trade approves it.
Costs and financial aid
Prices the schools published, with the year. All seven community colleges charge the same rates; the yearly figure is 30 credits and leaves out lab and program fees, books and tools.
| Community college student | Per credit, 2026-27 | 30 credits |
|---|---|---|
| New Hampshire residents | $238 a credit plus $25 fee | About $7,890 |
| Other New England residents in a program their state lacks | $357 a credit plus $25 fee | About $11,460 |
| Out of state | $523 a credit plus $25 fee | About $16,440 |
| Evening and fully online classes (Great Bay CC) | In-state rate for everyone | Depends on credits |
Short courses at Manchester CC’s workforce center cost $1,500 for phlebotomy, $2,500 for an LNA course, $5,800 for medical assisting and $9,150 for CDL-A, with exam and supply fees extra. At the NH School of Mechanical Trades, Electrical 101 and Plumbing 101 cost $2,200 in tuition, each year of apprentice classes $1,500 plus books and HVAC courses $2,640 to $2,800 in 2026.
Sources: Great Bay CC and Manchester CC tuition pages; course prices from each school’s program pages.
Paying for training
- Federal aid: all seven community colleges take Pell Grants and federal loans through the FAFSA. Short non-credit courses usually do not qualify, and the NH School of Mechanical Trades offers interest-free payment plans instead.
- A proposed free-tuition plan: in October 2026 Governor Ayotte proposed a Community College Promise Program that would cover community college tuition left after grants for residents with family income up to $100,000. It needs the Legislature to pass it in the 2027 budget and would start in fall 2027 at the earliest.
- Apprenticeships: apprentices are paid while they train, and ApprenticeshipNH, run by the community colleges, helps employers set up registered apprenticeships.
- Job training funds: White Mountains CC notes that unemployed people can often get help paying for CDL training through their local NH Employment Security office. Manchester CC’s accelerated welding program has been fully funded by a defense industry group.
- Veterans and the Guard: the community colleges waive tuition for eligible New Hampshire National Guard members and offer other tuition waivers. Check with the VA that your program is approved for the GI Bill.
Trade pathways and licensing
How each trade works in New Hampshire, where to train and which license you need. Pay is the New Hampshire median annual wage for all experience levels (BLS 2025, via O*NET OnLine).
Electrical and line work
The New Hampshire Electricians’ Board licenses electricians statewide. Under RSA 319-C:7, a journeyman needs 8,000 hours of work as an apprentice electrician, at least 600 hours of approved schooling and a state exam. Apprentices usually take about 150 hours of classes a year for four years.
- Length
- About 4 years of paid work plus 600 school hours
- License
- New Hampshire journeyman, then master electrician, after state exams
Where to train:
- Manchester CC: Electrical Technology certificate and AAS, day or evening, which meet the state’s apprentice school hours; Electrical Lineworker certificate with Eversource and IBEW Locals 104 and 1837
- Lakes Region CC: Electrical Systems Installation and Maintenance degree, where lab hours count toward apprentice experience; Electrical Power and Control
- NH School of Mechanical Trades: Electrical 101 for beginners (15 weeks, not licensing hours) and Journeyman Electrician years 1 to 4, 152 hours each on two evenings a week, in Manchester, Hampton and Moultonborough
Online option: None for the license hours; classroom work happens alongside paid work. See online options
Plumbing, HVAC, gas and welding
Plumbers and gas fitters are licensed by the state Mechanical Safety and Licensing Board. Under RSA 153:28, a gas piping installer or installation technician license needs 1,000 hours of field experience and a service technician 2,000, plus state exams. Plumbing apprentices register with the board and take yearly apprentice classes toward the journeyman exam. Refrigerant work needs federal EPA 608 certification; oil heat has only a voluntary state certification.
- Length
- Plumbing apprenticeship about 4 years; gas licenses 1,000 to 2,000 field hours; welding certificates 1 to 2 semesters
- License
- Journeyman and master plumber; gas fitter licenses; EPA 608 for refrigerant work
Where to train:
- Plumbing and gas: NH School of Mechanical Trades (Plumbing 101, plumbing apprentice years 1 to 4 at 152 hours each, gas piping installer 60 hours for $1,300, gas equipment installer and service technician courses)
- HVAC: Manchester CC (HVAC degree on a two- or three-year track; completing its HVAC courses counts 500 hours toward the 1,000 hours of field work for the first gas license) and NH School of Mechanical Trades (120-hour air conditioning, HVAC and oil heat courses)
- Welding: Manchester CC (certificates, AAS and a 12-week accelerated program), Great Bay CC and White Mountains CC (advanced welding and ASME pipe welding)
- Machining and manufacturing: Nashua CC (precision manufacturing, CNC), Great Bay CC (CNC, nondestructive testing) and Manchester CC
Online option: HVAC theory and EPA 608 prep can be studied online; welding, plumbing and gas work cannot. See online options
Automotive, diesel, CDL, marine and aviation
New Hampshire does not license auto or diesel mechanics; employers look for ASE certification and manufacturer training. Truck drivers need a commercial driver’s license after federal entry-level training, and aircraft mechanics need the FAA Airframe and Powerplant certificates.
- Length
- CDL a few weeks to one semester; certificates 1 to 3 semesters; AAS degrees 2 years
- New Hampshire median pay
- $59,020 auto technicians; $71,390 diesel mechanics; $60,280 truck drivers; $79,610 aircraft mechanics
- License
- New Hampshire CDL; FAA mechanic certificates; none for auto or diesel work
Where to train:
- Automotive: Manchester CC (ASE-accredited, with brand programs), Nashua CC (Honda, Mazda and general automotive, collision repair), Lakes Region CC (GM and Toyota programs), Great Bay CC (evenings in Rochester; motorcycle repair in North Hampton) and White Mountains CC (including an electric vehicle certificate)
- Diesel and heavy equipment: White Mountains CC in Berlin, the only AED-accredited diesel program in New England
- CDL: Manchester CC (CDL-A, online theory and range training in Concord, $9,150) and White Mountains CC (one-semester certificate, eligible for financial aid)
- Aviation: Nashua CC, FAA-approved for airframe and powerplant exams; marine: Lakes Region CC (7-month marine maintenance certificate)
Online option: None we would recommend; these trades are learned in a shop or a truck. See online options
Nursing and healthcare
The New Hampshire Board of Nursing licenses nurses and licensed nursing assistants (LNAs). LNAs complete a board-approved course and pass a state exam; nurses take the NCLEX after an approved program. Pharmacy technicians must be registered or certified under RSA 318:15-a.
- Length
- LNA 6 to 8 weeks; phlebotomy 5 to 6 weeks; LPN 1 year; RN degrees about 2 years
- New Hampshire median pay
- $99,700 RN; $77,110 LPN; $47,870 nursing assistants; $48,020 medical assistants; $59,530 dental assistants
- License
- NCLEX and a New Hampshire nursing license; LNA license after a state exam; pharmacy technician registration
Where to train:
- LNA: Manchester CC (150 hours, $2,500), Great Bay CC, Lakes Region CC and River Valley CC
- LPN: River Valley CC‘s one-year program, taught in Claremont, Keene, Lebanon, Littleton, Manchester and Nashua; an LNA license is required to apply
- Dental and imaging: NHTI (the state’s only accredited dental assisting program, dental hygiene, radiologic technology, sonography); River Valley CC (radiologic technology, respiratory therapy)
- Other: surgical technology at Great Bay CC; medical assisting at Manchester CC, Great Bay CC and River Valley CC; nursing at every community college
Online option: Medical coding and pharmacy technician coursework can be studied online; nursing and LNA clinical hours cannot. See online options
EMT, paramedic and fire
Paramedics train in accredited programs with hundreds of hours of hospital and ambulance clinicals, then test for a state license. Fire science degrees help firefighters move into officer roles.
- Length
- Paramedic associate degree about 2 years
- License
- New Hampshire EMS license
Where to train:
- NHTI: paramedic degree accredited by CAAHEP, with 224 first-year clinical hours and 320 hours on an advanced life support ambulance
- Lakes Region CC: paramedic and fire science programs in Laconia
Online option: None; EMS training needs hands-on skills and clinical time. See online options
Cosmetology, barbering and massage
New Hampshire licenses beauty workers after school or apprenticeship hours and an exam: under RSA 313-A, 1,200 school hours for a cosmetologist, 800 for a barber, 600 for an esthetician and 300 for a manicurist, with longer salon apprenticeships allowed instead. Massage therapists must pass a national exam such as the MBLEx under RSA 328-B.
- Length
- 300 hours (manicuring) to 1,200 hours (cosmetology); massage certificates about 3 semesters
- License
- New Hampshire cosmetologist, barber, esthetician, manicurist and massage therapist licenses
Where to train:
- Massage therapy: Great Bay CC (3 semesters full time; the college reports a 98% MBLEx pass rate) and River Valley CC
- Cosmetology and barber schools: New Hampshire has private schools we have not yet reviewed; confirm a school is approved by the state board before you enroll
Online option: None; New Hampshire requires school or apprenticeship hours. See online options
Veterinary, IT and other careers
Veterinary technicians train in AVMA-accredited programs that prepare for the national VTNE exam; IT careers need no state license, and employers look for industry certifications.
- Length
- Certificates to 2-year associate degrees
- New Hampshire median pay
- $48,780 veterinary technicians; $60,660 computer support specialists; $124,000 information security analysts
- Certification
- VTNE for vet techs; IT certifications
Where to train:
- Veterinary technology: Great Bay CC (AVMA-accredited since 1998)
- IT and cybersecurity: NHTI, Nashua CC, Manchester CC, River Valley CC and White Mountains CC
- Culinary arts: Lakes Region CC and White Mountains CC
Online option: IT and business degrees are offered online by New England College and through the community colleges. See online options
Frequently asked questions
What are the best trade schools in New Hampshire?
New Hampshire’s main trade schools are its seven community colleges: Manchester, Nashua, NHTI in Concord, Great Bay in Portsmouth and Rochester, Lakes Region in Laconia, River Valley in Claremont, Keene and Lebanon, and White Mountains in Berlin and Littleton. The best one depends on the trade: Manchester for electrical and HVAC, Nashua for aviation and automotive, Berlin for diesel and welding, Concord for dental and imaging. The New Hampshire School of Mechanical Trades teaches evening electrical, plumbing, HVAC and gas courses.
What trade schools are in Manchester, NH?
Manchester Community College teaches electrical technology, HVAC, welding, automotive and line work, plus short LNA, phlebotomy, medical assistant and CDL-A courses. The New Hampshire School of Mechanical Trades in Manchester teaches pre-apprentice and apprentice classes for electricians and plumbers, HVAC and gas licensing courses. Nashua Community College is about 20 miles south.
How much does trade school cost in New Hampshire?
All seven community colleges charge New Hampshire residents $238 a credit plus a $25 fee in 2026-27, about $7,900 for a full-time year of 30 credits. Short courses cost $1,500 to $9,150 at Manchester CC, and a year of apprentice classes at the NH School of Mechanical Trades costs $1,500 plus books.
Is community college free in New Hampshire?
Not yet. In October 2026 the governor proposed a Community College Promise Program that would pay remaining tuition for residents with family income up to $100,000, but the Legislature must approve it in the 2027 budget and it would start in fall 2027 at the earliest. For now, Pell Grants and scholarships are the main help.
How do you become an electrician in New Hampshire?
Get an apprentice card and a job with a licensed electrician, then complete 8,000 hours of apprentice work and at least 600 hours of approved classes before the journeyman exam. Manchester CC, Lakes Region CC and the NH School of Mechanical Trades teach the apprentice classes.
Can I go to trade school online in New Hampshire?
For some careers, yes. NHTI teaches medical coding fully online, New England College teaches online degrees, and national schools teach billing and coding, pharmacy technician and HVAC theory. Licensed trades such as electrician, plumbing, cosmetology, LNA and nursing need hands-on hours in person.
Facts checked October 2026. College facts come from each college’s own program and tuition pages; the NH School of Mechanical Trades facts come from its website. Franklin Pierce and the national online schools link to their profiles on this site, where the original sources are listed. Pay figures are New Hampshire median annual wages from BLS 2025 data, via O*NET OnLine. Licensing requirements are from New Hampshire statutes (RSA 153, 313-A, 318, 319-C, 326-B and 328-B) and the FAA.