| Fact | Detail |
|---|---|
| Type | Private nonprofit technical college; campus-based, with 11 programs online |
| Campus | 1, in Minneapolis, Minnesota |
| Credentials | Certificates, associate degrees (AAS), bachelor’s degrees (BS) and a Bachelor of Architecture |
| Programs | 45, in nine departments |
| Typical length | 1-year certificates, 2-year associate degrees, 4-year bachelor’s degrees |
| Accreditation | Higher Learning Commission; reaffirmed February 2024, next reaffirmation 2033-34 |
| Federal aid | Yes |
| 2026-27 cost | One total per program, no residency rates: $19,361 to $143,242 |
| Students | 1,645 in fall 2026 |
| Founded | 1914 |
| Facts checked | October 2026 |
Dunwoody: a private technical college on the edge of downtown Minneapolis
Dunwoody College of Technology is a private, nonprofit college registered with the Minnesota Office of Higher Education, founded in 1914 through a bequest to create a school of practical trades. It has one campus, on the western edge of downtown Minneapolis. The college lists 45 programs in nine departments, from one-year certificates to bachelor’s degrees in construction, design and engineering, and in fall 2025 about two-thirds of students were in a one-year certificate or two-year associate degree. Fall 2026 enrollment was 1,645, the fifth straight year of growth. Recent changes: three design bachelor’s degrees, Interior Architecture, Product Design and Experiential Graphic Design, started in Fall 2026; the Software Engineering BS stopped admitting students in 2024-25; and a Civil Engineering BS is due to start in Fall 2027.
Programs at Dunwoody, with 2026-27 prices
The table shows the main career programs. Dunwoody publishes one total for each program, covering tuition, required device fees, books, supplies and course fees for the whole program, so the last column is what the full program costs before aid.
| Program | Credential | Length | Delivery | Prepares for | 2026-27 program total |
|---|---|---|---|---|---|
| Welding Technology | Certificate | 1 year (2 semesters) | Day, on campus | Up to four AWS D1.1 certifications | $30,181 |
| Welding & Metal Fabrication | AAS | 2 years | Day, on campus | Up to four AWS D1.1 certifications (first year) | $64,323 |
| Machine Tool Technology | AAS (NIMS-accredited) | 2 years | Day, on campus | CNC milling and turning | $65,615 |
| Right Skills Now for Manufacturing | CNC certificate | 2 terms | On campus | – | $19,361 |
| HVAC & Refrigeration Technology | AAS, 63 credits (HVAC Excellence) | 4 semesters | Day, on campus | EPA 608, Minnesota boiler operator licence, OSHA 10 | $56,598 |
| Electrical Construction & Maintenance | AAS (Minnesota DLI-approved) | 2 years | Day, on campus | One year of experience toward Minnesota electrician licences | $67,678 |
| Construction Project Management | AAS (ACCE); certificate | 2 years (AAS) | Day and evening, on campus | – | $73,180 (AAS); $22,040 (certificate) |
| Construction Management | BS completion (ACCE) | About 2 years after a two-year degree | Online, some live evening classes | – | $65,082 |
| Land Surveying | Post-bachelor’s certificate, 22 credits | 2 semesters | Day and night, on campus | Fundamentals of Surveying exam; Minnesota licensure | $26,974 |
| Radiologic Technology | AAS, 66 credits (JRCERT) | 24 months | Day, on campus, plus clinicals | ARRT exam | $69,276 |
| Graphic Design & Production | AAS | 2 years | Day, on campus | – | $61,236 |
| Interior Architecture | BS, 120 credits | 8 semesters | Day, on campus | – | $125,967 |
| Computer Networking Systems | AAS | 2 years | Day on campus, or online | – | $57,469 |
| Web Programming & Database Development | AAS | 2 years | Day on campus, or online | – | $56,696 |
| Cybersecurity | BS; BS completion | 4 years; about 2 years after an AAS | Day on campus; completion online | – | $122,085; $62,782 |
| Computer Engineering | BS | 8 terms | On campus | – | $143,242 |
About 15 of the 45 programs hold programmatic accreditation, according to the college’s program accreditations list: JRCERT for Radiologic Technology (an eight-year award through 2033), HVAC Excellence for HVAC & Refrigeration (through 2031), ACCE for Construction Project Management (through July 2027) and Construction Management (through July 2030), NIMS for Machine Tool Technology, the ASE Education Foundation for the two automotive service and collision degrees, NAAB for the Bachelor of Architecture, CIDA for Interior Architecture (listed in the 2026-27 catalog) and ABET for four engineering and engineering technology degrees. The Electrical Construction & Maintenance AAS is approved by the Minnesota Department of Labor and Industry, which is an approval rather than an accreditation. The welding, graphic design, networking, cybersecurity and web programming programs have no programmatic accreditation.
Radiologic Technology is Dunwoody’s only health program; the college has no nursing programs. It also teaches automotive (including Honda PACT and Toyota T-TEN), robotics and electronics, and engineering, listed in the program groups below.
What the main programs cover
Radiologic Technology
The degree runs six semesters and 66 credits over 24 continuous months. Classes are on campus by day; clinical rotations take two days a week in the first year and up to three in the second, at sites including North Memorial, Methodist, HCMC, Maple Grove Hospital, Park Nicollet and Allina. Cohorts are capped at 16. Applicants need at least a 2.5 GPA, a resume and two or three professional references, and the next deadline is 1 February 2027 for a Fall 2027 start. The ARRT application fee of $225 is extra.
HVAC & Refrigeration Technology
The 63 credits split into 48 technical and 15 general-education credits over four semesters, all by day on campus. EPA 608 certification is earned through the Esco Institute, and students also work toward the Minnesota Special Engineers Boiler Operator License, an OSHA 10 card, a hydrocarbon refrigerants certificate and HVAC Excellence certifications. The outcome figure on the program’s web page belongs to an earlier version of the program, so ask for results from the current one. Graduates who want a bachelor’s degree can transfer credits into Construction Management or Business Management & Leadership.
Electrical Construction & Maintenance
This is the college’s biggest program, with 251 students in fall 2025. It is a two-year, daytime, on-campus AAS for students who want to work as electricians in construction and maintenance. Because the Minnesota Department of Labor and Industry approves the program, the two years count as one year of the experience required for a Class A journeyworker, power limited technician or maintenance electrician licence in Minnesota. Students who want design or estimating work rather than the trade can take the online Electrical Construction Design & Management AAS instead.
Welding Technology
The certificate takes two semesters of daytime classes on campus, taught by AWS-certified instructors, and students can test for up to four American Welding Society D1.1 certifications before they finish. Students who want a longer program can move their credits into the Welding & Metal Fabrication AAS, a two-year degree that offers the same certifications in its first year. Neither program has programmatic accreditation. The college counted 11 certificate graduates in 2024-25 and reports a 75% in-field employment rate for them within six months.
Land Surveying
The certificate is aimed at people who already hold a bachelor’s degree and want a Minnesota surveying licence. It is 22 technical credits over two semesters, with classes by day and at night. Graduates who meet Minnesota Rules 1800.3505, subpart 2 can sit the Fundamentals of Surveying exam. The college designs it for Minnesota licensure only, so students planning to work elsewhere should check with that state’s board. Students without a degree have an accelerated surveying-technician option, and the two-year Surveying & Civil Engineering Technology AAS is another route into the field.
What programs cost in 2026-27, and how students pay
Dunwoody is private and sets one price per program: there is no in-state rate and no published per-credit price. The college’s 2026-27 tuition pricing summary gives each program’s total, including required device fees, books, supplies and course fees. Examples:
| Program | Credential | 2026-27 total |
|---|---|---|
| Right Skills Now for Manufacturing (CNC) | Certificate, 2 terms | $19,361 (lowest) |
| Welding Technology | Certificate, 2 semesters | $30,181 |
| HVAC & Refrigeration Technology | AAS | $56,598 |
| Electrical Construction & Maintenance | AAS | $67,678 |
| Radiologic Technology | AAS, 6 semesters | $69,276 |
| Computer Engineering | BS, 8 terms | $143,242 (highest) |
The Radiologic Technology information packet gives a slightly higher total for the same year, $69,621, so check the figure with the program.
Dunwoody takes federal student aid, and students apply with the FAFSA. Named scholarships include the Aspire Scholarship, the High School Engagement Scholarship, Mortenson Pathway, Pathways to Careers (P2C) and Project Lead The Way; the college does not publish amounts. Veterans have a Veteran & Military Student Resources page and a Veteran Emergency Fund.
Admission, and a mostly daytime schedule
Applicants send a high school transcript showing a graduation date, or a GED, plus any college transcripts. Admission is a holistic review of coursework, GPA and an application essay; the ACT and SAT are not required, and every new student attends orientation. Niche puts the acceptance rate at 99%. Radiologic Technology is the exception, with 16 seats per cohort and its own requirements, and the Construction Management and Cybersecurity completion degrees need a two-year degree first.
Most trade, health and design programs are daytime only and on campus only. Construction Project Management adds evening classes and Land Surveying has night classes. Eleven programs are online: bachelor’s completion degrees in Architecture, Business Management & Leadership, Construction Management, Cybersecurity, Facilities Management and Power & Construction Engineering Technology; AAS degrees in Cloud Engineering Technology, Computer Networking Systems, Electrical Construction Design & Management and Web Programming & Database Development; and an Electrical Drafting & Estimating certificate. Because Dunwoody takes part in NC-SARA, students in other SARA member states can enroll in them.
Accreditation and results
Dunwoody is accredited by the Higher Learning Commission. After a ten-year evaluation with a campus visit in fall 2023, HLC reaffirmed the college’s accreditation in February 2024; the college reports that it met all criteria and core components with no concerns, and the next reaffirmation is due in 2033-34.
The college’s 2024-25 Career Services report follows graduates for six months and reached 92% of them. The Radiologic Technology figures come from the program’s information packet.
| Measure | Result | Group and definition |
|---|---|---|
| Career outcomes rate | 98% | 500 graduates from summer 2024 to spring 2025, within six months: working, in the military, continuing their education, waiting for a union position or volunteering |
| In-field employment rate | 91% | Same graduates: employed in a related field, after the college’s exclusions |
| Average salary | $62,951 | Self-reported by graduates employed in a related field |
| Radiologic Technology, ARRT pass rate | 94% (17 of 18); 88% (77 of 88) over five years | Most recent year; 2021-2025 |
| Radiologic Technology, job placement | 100% (17 of 17) | Most recent year |
| Radiologic Technology, program completion | 90% (18 of 20) | Most recent year |
| Retention | 76% | 2024-25, college facts page |
Program groups are small (Radiologic Technology had 23 graduates in 2024-25), so single-year rates can swing. The Radiologic Technology information packet does not say whether its ARRT pass rate counts first attempts only.
Before you enroll
- The price is set per program, with no lower in-state rate: the two-year AAS programs in the programs table run from $56,598 (HVAC & Refrigeration) to $73,180 (Construction Project Management) in total for 2026-27, and bachelor’s degrees cost more.
- Plan around daytime classes. Most programs are daytime only and on campus only; on-campus evening or night classes are limited to Construction Project Management and Land Surveying, and the online Construction Management BS has some live evening classes.
- The Electrical Construction & Maintenance AAS is not a licence. It counts as one year of experience toward a Minnesota electrician licence.
- The licence-track Land Surveying certificate requires a bachelor’s degree, and the Surveying & Civil Engineering Technology AAS does not lead to licensure on its own.
- Interior Architecture replaced the former interior design bachelor’s degree in Fall 2026, and the 2026-27 catalog lists CIDA accreditation for the new degree, though the old degree’s CIDA term ran through April 2026, so confirm the current CIDA action with the college. The Software Engineering BS no longer admits students.
One campus in Minneapolis
All on-campus teaching happens at 818 Dunwoody Boulevard, Minneapolis, MN 55403, and the online programs are run from there. The Prospect Park student apartments, the online programs and Dunwoody Immersive, a dual-credit virtual-reality program in Minnesota high schools announced in September 2026, are not separate campuses. Radiologic Technology students also train at partner hospitals across the Twin Cities.
Housing and career help
Students can rent two-, three- and four-bedroom college apartments in Prospect Park; the college’s 2025-26 budget put on-campus housing at $11,766 a year and food at $3,898. The campus has a cafeteria open five days a week, a bookstore and student lounges. Career Services publishes an outcomes report each year with its definitions, and reviewers often mention career fairs and employer connections.
What students say
On Niche, Dunwoody College of Technology is rated 4.13 out of 5 from 208 reviews, with an overall grade of B (checked October 2026). Reviewers most often praise caring instructors who give one-on-one help, hands-on, project-based learning and small classes taught by people from industry, along with career fairs and employer connections. Some praise flexible evening scheduling, though most programs meet by day. The main complaints are uneven teaching quality and some outdated lab equipment (Computer Networking Systems is named), high tuition and living costs, and, in one review, financial-aid support. The reviews cover the whole college, and we could not see review dates, so we could not tell whether they were invited by the school or posted in bursts.
Facts checked October 2026.
Programs & Courses
Construction Sciences and Building Technology
- Electrical Construction & Maintenance (AAS)
- Electrical Construction Design & Management (AAS, online)
- Electrical Drafting & Estimating (certificate, online)
- Power & Construction Engineering Technology (BS completion, online)
- HVAC & Refrigeration Technology (AAS)
- Construction Project Management (AAS and certificate)
- Construction Management (BS completion, online)
- Land Surveying (post-bachelor's certificate)
- Surveying & Civil Engineering Technology (AAS)
Manufacturing and Welding
- Welding Technology (certificate)
- Welding & Metal Fabrication (AAS)
- Machine Tool Technology (AAS)
- Right Skills Now for Manufacturing (CNC certificate)
- Engineering Drafting & Design (AAS)
- Industrial Engineering Technology (BS)
Robotics and Electronics
- Automated Systems & Robotics (AAS)
- Industrial Controls & Robotics (AAS)
- Industrial Controls (certificate)
- Electronics Technology (AAS and certificate)
- Electronics Engineering Technology (AAS)
- Automation & Controls Engineering Technology (BS)
Computer Technology
- Computer Networking Systems (AAS, on campus or online)
- Web Programming & Database Development (AAS, on campus or online)
- Cloud Engineering Technology (AAS, online)
- Cybersecurity (BS; online BS completion)
Engineering
- Computer Engineering (BS)
- Electrical Engineering (BS)
- Mechanical Engineering (BS)
Automotive
- Automotive Service Technology (AAS)
- Automotive Collision Repair & Refinishing (AAS)
- Honda PACT (AAS)
- Toyota T-TEN (AAS)
Design and Architecture
- Interior Architecture (BS)
- Graphic Design & Production (AAS)
- Experiential Graphic Design (BS)
- Product Design (BS)
- Architectural Drafting & Design (AAS)
- Bachelor of Architecture (also an online completion option)
Health Sciences
- Radiologic Technology (AAS)
Business and Management
- Business Management & Leadership (BS completion, online)
- Facilities Management (BS completion, online)
Campus Locations
Minneapolis, MN 818 Dunwoody Boulevard, Minneapolis, MN 55403