Pro Weld

Fact Detail
Type Small private, for-profit welding school; in person only
Location 1 site in Nampa, Idaho (Boise area)
Courses 4 welding courses plus welder qualification tests by appointment
Credential Pro-Weld Diploma (the school’s own document) and welder qualification tests
Length 12 to 26 weeks, two days a week
Tuition $3,000 to $4,700 a course, as listed in October 2026
Accreditation None; on the Idaho State Board of Education’s Winter 2025 list of registered proprietary schools
Federal aid No; WIOA, GI Bill and other agency funding accepted
Facts checked October 2026

Pro-Weld: a one-instructor welding school in Nampa, Idaho

Pro-Weld Welding School is a small, privately owned, for-profit school in Nampa, in the Boise area, that teaches only welding and metal fabrication. It runs four fixed-length courses, from 12 weeks of pipe welding or GTAW to 26 weeks of 6GR pipe welding, and sells welder qualification tests on their own, by appointment. One Certified Welding Inspector, who also owns the school, teaches every course, so classes are small group sessions. Classes meet two days a week, 8 a.m. to 1 p.m. The school is not accredited and does not take federal student aid, but it accepts state workforce, vocational rehabilitation and veterans’ funding.

Four welding courses and per-test qualifications

Every course is taught in person in Nampa. Students pick a Monday and Wednesday or a Tuesday and Thursday group.

Course What you get Length Tuition (Oct 2026)
Welder Fabrication (GMAW, FCAW, SMAW) Pro-Weld Diploma; welder qualification tests 216 clock hours, 18 weeks $4,000 + $400 supplies
Pipe Welding (6G) Pro-Weld Diploma; welder qualification tests 144 clock hours, 12 weeks $3,000
GTAW (Gas Tungsten Arc Welding) Pro-Weld Diploma; welder qualification tests 144 clock hours, 12 weeks $4,000
Pipe Welding (6GR) Pro-Weld Diploma; welder qualification tests 312 clock hours, 26 weeks $4,700
Welder qualification test only Pass/fail test, no training By appointment $250 a test

The courses teach to the American Welding Society’s D1.1 Structural Welding Code, but the school is not an AWS Accredited Test Facility and does not claim to be. Its “certifications” are welder qualification tests witnessed by its Certified Welding Inspector.

What the main programs cover

Welder Fabrication

Welder Fabrication, at 216 clock hours over 18 weeks, covers three processes: gas metal arc (GMAW), flux-cored (FCAW) and shielded metal arc (SMAW) welding. Alongside welding, students learn blueprint reading and welding symbols, torch cutting and air arc cutting, fabrication with shop machinery such as an iron worker and metal saws, and safety. They also work with the AWS D1.1 code and with welding procedure specifications (WPS) and procedure qualification records (PQR). Students buy their own auto-darkening hood, gloves, safety glasses and tool box.

Pipe welding (6G and 6GR)

The two pipe courses train welders for qualification tests in the 6G pipe position. The school’s January 2026 curriculum covers 6G pipe in both SMAW and GMAW, with welds judged by visual and bend tests against AWS acceptance criteria. Pipe Welding 6G runs 144 clock hours over 12 weeks. Pipe Welding 6GR, at 312 hours over 26 weeks, is the school’s longest course and covers the 6GR restricted-access version of the position. Both meet on the same two-day, 8 a.m. to 1 p.m. schedule as the other courses.

GTAW (Gas Tungsten Arc Welding)

The GTAW course runs 144 clock hours over 12 weeks, the same length as Pipe Welding 6G. The school’s curriculum document, dated January 2026, lists GTAW on three metals: carbon steel, austenitic stainless steel and aluminum. Like the other courses, it is taught in small groups by the school’s Certified Welding Inspector and ends with qualification tests. No supplies fee is listed for GTAW, and the school publishes no separate entry requirements for it.

Pro-Weld Diploma and qualification tests

The January 2026 curriculum ties the courses together. Students cover safety, job-search skills, blueprint interpretation, weld inspection and testing, oxyfuel and air carbon arc cutting, and plate and pipe positions in SMAW, GMAW (including spray transfer), FCAW and GTAW. To earn the Pro-Weld Diploma, a student must pass a general written exam with more than 75% and the safety exam with 90%, submit workmanship samples and pass qualification tests. The diploma is the school’s own document, not a state licence or an AWS credential.

Tuition, supplies and how students pay

Pro-Weld charges one price per course, with no in-state or out-of-state rates. The prices below are those on the school’s courses page in October 2026 and match its state workforce training records; neither gives an effective date.

Course Tuition Supplies Total
Welder Fabrication $4,000 $400 $4,400
Pipe Welding (6G) $3,000 None listed $3,000
GTAW $4,000 None listed $4,000
Pipe Welding (6GR) $4,700 None listed $4,700
Welder qualification test $250 a test – $250

The school does not take federal student aid (no Pell Grants or federal loans). Its IdahoWorks training-provider record lists WIOA, Vocational Rehabilitation, the GI Bill, Health and Welfare and Idaho LAUNCH as accepted funding, and the school’s site says it is state-approved for veterans’ education benefits. The school also offers payment plans but does not publish the terms.

Admissions and schedule

The school publishes no admission requirements, minimum age, application fee or start dates, and its state training-provider record lists no prerequisites. Call the school to ask when the next group starts. Classes are daytime only, in person, two days a week from 8 a.m. to 1 p.m., in a Monday and Wednesday or a Tuesday and Thursday group. There is no evening, weekend or online option. Qualification tests are booked by appointment.

State registration, no accreditation, no published results

Pro-Weld is not accredited by any accrediting agency. It is listed as a registered non-degree proprietary school on the Idaho State Board of Education’s Winter 2025 list of registered schools. It is also an approved IdahoWorks Eligible Training Provider under WIOA, and all four courses are due for renewal of that approval in April 2027. That state approval is not accreditation. The school publishes no completion, job-placement or test pass rates, and we found it in no federal college data, which fits a school that does not take federal aid.

Before you enroll

  • The school’s “certification” is a welder qualification test witnessed by its own Certified Welding Inspector. It is not an AWS Certified Welder credential on the national registry, and it counts only where an employer accepts it. Ask the employers you plan to apply to.
  • The school’s published hours do not match its schedule. Each course’s published hours and weeks work out to 12 clock hours a week (for example, 144 hours in 12 weeks), but the published schedule is two five-hour days, or 10 hours a week. Ask how the extra hours are scheduled.
  • Older pages still on the school’s website show lower prices and longer course lengths. Use the current courses page, and get the price in writing before you start.
  • There is no housing and no described job-placement service. The school says its training will help you get a welding job, but it publishes no placement figures.

Where classes meet

All classes and qualification tests take place at 918 South Impressions Ct, Nampa, ID 83686, in the Boise area. There is no second location and no online division.

Facts checked October 2026.

Programs & Courses

Welding Courses

  • Welder Fabrication Course (GMAW, FCAW, SMAW)
  • Pipe Welding Course (6G)
  • Pipe Welding Course (6GR)
  • GTAW (Gas Tungsten Arc Welding)

Testing

  • Welder qualification test (per test, by appointment)

Campus Locations

Boise (Nampa), ID 918 South Impressions Ct, Nampa, ID 83686